Logo

Proper care for your pipes

There are many ways to take care of your pipes at home. If you see any cracked, leakage and burst pipes, you must act immediately. This can bring a lot of damage to you and your family. In fact, it can cost you a lot when it comes to repairing it. Remember that when winter comes, the pipes at home need to be in their best condition. You should protect them from freezing. Why? When your pipes are frozen, it can cause too much pressure. Thus, the pipes are more prone to splitting and disconnecting. These can be a big problem to fix especially during winter.

Here are some ways to take care of your pipes.

Put some insulation.

It is necessary for you to put some insulation. You can also add some lagging for protection. This is particularly important for places that are not reached by heat or warmth. These are the roof, loft and those areas found in the outbuildings. However, if you are quite unsure about the type of insulation you should use, you can call your plumber. You can ask advice from him on which type, brand, and size of lagging to use. You can also go to a DIY store nearby. Lagging can be done by purchasing foam tubes. Then, these are fitted around the pipe. You have to be accurate with the measurements of your pipe so as not to waste money when you buy the lagging materials. The foam tube will be wrapped around the pipes with the help of an adhesive.

Know when your pipes are frozen

When the temperature is too low and you do not have any water supply, this only means that your pipes are already frozen. You can call your neighbors if their supply has also stopped. If they would say no, there is a problem with your own piping system. When this happens, you have to act quickly.

How to deal with frozen pipes?

You have to check the area as quickly as possible. The damage may be too big for you to handle if you do not act immediately. Do not wait for your pipes to burst or split up. You may start by thawing the pipes and letting the water run through the pipes. You have to start the thawing process at the end most portion of the pipe. This is to prevent the steam from being trapped in the middle and thereby destroying the pipe.

If it is hard, you can call your plumber immediately. If you are not confident enough. You should call your local plumber for help.

Scroll to Top