A dripping tap may seem like a small problem, yet it can quickly become frustrating. The constant sound of water can disturb a quiet home, and even a slow drip can waste a surprising amount of water over time.
Left unresolved, a leaking tap can increase your water bill and cause unnecessary wear on your plumbing fittings. Fortunately, many dripping taps have simple causes that can sometimes be addressed with basic checks.
For homeowners across Greater Manchester, recognising the early signs and acting quickly can prevent a minor issue from becoming a larger repair.
Causes Of A Dripping Tap
Taps begin to drip for several reasons. With daily use the internal components slowly wear down, especially in busy kitchens and bathrooms.
Causes include:
- A worn rubber washer inside the tap mechanism
- A damaged valve seat within the tap body
- Mineral buildup affecting internal seals
- General wear within the tap cartridge
In many cases, the washer is responsible for the leak, particularly in traditional compression taps commonly found in older properties.
First Step Turn Off The Water Supply
Before attempting any repair, turn off the water supply. This prevents water from flowing while you inspect the tap.
Many homes have a small isolation valve beneath the sink, which allows the water supply to that tap to be turned off. If this valve is not present, the main stop tap for the property may need to be closed instead.
The stop tap is usually located under the kitchen sink or near the water supply entry point. Once the supply is turned off, open the tap briefly to release any remaining water pressure.
Accessing The Tap Mechanism
After isolating the water supply, you can carefully access the top section of the tap.
Many taps have a decorative handle cap that hides the fixing screw. Once this cap is gently removed, the screw beneath can be loosened. The handle can then be lifted away, allowing access to the internal valve components.
It is important to keep small parts such as screws and caps in a safe place while working. Losing these components can make reassembly difficult.
Replacing A Worn Washer
A worn washer is one of the most common reasons for a dripping tap. Over time, the rubber washer compresses and loses its ability to create a tight seal.
Once the tap head has been removed, you may be able to access the washer attached to the valve. Inspect it carefully for flattening, cracks or general damage. If the washer appears worn, replacing it may resolve the problem.
After replacing the washer, reassemble the tap carefully and turn the water supply back on. Test the tap to confirm the dripping has stopped and the handle operates smoothly.
Correct Washer Size Matters
Choosing the correct washer size is important for a successful repair. Washers that are too large or too small will not seal properly, and the leak may continue.
A useful approach is to take the old washer or tap component to a plumbing merchant. They can often identify the correct replacement part for your tap model.
Using the correct size ensures the tap operates properly and helps prevent further leaks.
Water Waste From A Dripping Tap
Many homeowners underestimate the amount of water lost through a leaking tap. Even a slow drip can waste a surprising volume of water over the course of a year.
Aside from the environmental impact, this wasted water can increase your household water bill. Addressing a dripping tap quickly helps reduce unnecessary water use and keeps your plumbing system working efficiently.
Different Types Of Household Taps
Understanding the type of tap installed in your home can help identify the likely cause of a leak.
Common tap designs found in UK homes include:
Compression Taps
These taps use a rubber washer that presses down to stop the water flow. Worn washers are the most common cause of leaks in this style.
Ceramic Disc Taps
Many modern taps contain ceramic cartridges instead of washers. Leaks may occur if the cartridge becomes worn or damaged over time.
Mixer Taps
Mixer taps combine hot and cold water into a single spout. Drips from these taps are often caused by the internal cartridge or sealing components.
Identifying the tap type helps determine whether a washer replacement or cartridge repair is required.
Warning Signs Of Tap Problems
A dripping tap is often the final stage of a developing issue. Homeowners may notice earlier signs that suggest a tap needs attention.
Common warning signs include:
- Handles becoming stiff or difficult to turn
- The tap requires extra force to close fully
- Water appearing around the base of the tap
- Uneven or spluttering water flow
Addressing these signs early can prevent leaks and extend the tap’s life.
Ways To Prevent Future Leaks
While taps will eventually wear with age, a few simple habits can help reduce unnecessary strain on internal components.
Helpful practices include:
- Avoid tightening taps excessively when turning them off
- Clean limescale from tap fittings regularly
- Replace worn washers before leaks worsen
- Check for small drips during routine household maintenance
These small steps can help taps last longer and maintain smooth operation.
Signs A Professional Plumber May Be Needed
Some dripping taps are straightforward to repair, but others may indicate more complicated problems inside the tap body or pipework.
Professional assistance may be needed if:
- The tap continues to drip after replacing the washer
- Internal components appear corroded or damaged
- The tap cartridge cannot be removed safely
- Water leaks from the base of the tap or pipe connections
In these situations, a qualified plumber can diagnose the issue quickly and prevent further damage.
Manchester Plumbing and Heating (Sale)
If a dripping tap continues to cause problems, Manchester Plumbing and Heating (Sale) can help. Our experienced plumbers carry out reliable tap repairs across Greater Manchester and surrounding areas.
From worn washers to faulty cartridges and leaking fittings, we provide clear advice and practical plumbing service that restore your tap to proper working order.
Repairing a dripping tap early helps prevent water waste, reduces household noise, and keeps your plumbing system running smoothly. If you need assistance with tap repairs or general plumbing support, our team is ready to help.
Related Articles
- Looking for Water Leaks in Your Home
- How To Fix a Leaking Radiator
- How to Fix a Dripping Tap
- Common Plumbing Issues and Remedies
- Do I need a Plumber or a Heating Engineer?
Prefer an AI Summary?





