Logo

How to Reset Your Boiler

If your boiler is not working, you may need to reset it. Resetting your boiler can fix a number of problems, such as:

  • A blown fuse
  • A tripped circuit breaker
  • A problem with the thermostat
  • A problem with the pilot light

How to reset your boiler, follow these steps:

  1. Turn off the power to your boiler at the main switch.
  2. Locate the reset button on your boiler. The reset button is usually a small, red button.
  3. Press and hold the reset button for 10 seconds.
  4. Turn the power back on to your boiler at the main switch.
  5. Wait for your boiler to start up.

If your boiler still does not work after you have reset it, you may need to call a qualified technician.

Here are some additional tips for resetting your boiler:

  • If you are not sure where the reset button is located, check your boiler’s manual.
  • Do not touch any other controls on your boiler while you are resetting it.
  • If you have any doubts about resetting your boiler, call a qualified technician.

Here are some common problems that can be fixed by resetting your boiler:

  • A blown fuse
  • A tripped circuit breaker
  • A problem with the thermostat
  • A problem with the pilot light

If your boiler is not working and you have tried resetting it, here are some other things you can try:

  • Check the water pressure in your boiler. The water pressure should be between 1 and 1.5 bar.
  • Check the gas supply to your boiler. Make sure that the gas supply is turned on.
  • Check the flue. The flue is the pipe that carries the exhaust gases from your boiler to the outside. Make sure that the flue is not blocked or damaged.

Troubleshooting Boiler Issues after Resetting

Some boilers may take several minutes to reset or may require two attempts. If your boiler doesn’t turn on after resetting, or the error code persists, contact a Gas Safe Engineer.

Resetting a Boiler after Gas Supply Runs Out

If you have a pay-as-you-go meter and your boiler shuts down due to a lack of gas, follow the standard boiler reset steps once you have topped up your meter. In most cases, you can add emergency gas to your meter if necessary.

If you have checked all of the above and your boiler is still not working, call a qualified technician.

 

Related Articles

 

Scroll to Top